High Amp - 25 AMP Floats - L Series

  • Share

These high quality float switches are designed for high amp loads (25 AMPS & up to 2 HP).

  • The floats have 3 power connection options:
    • Skived Ends Where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box.
    • 120 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 120 VAC outlet, and plug your pump into the piggyback plug. Limited to 15 AMPS due to the plug
    • 240 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 240 VAC outlet, and plug your pump into the piggyback plug. Limited to 15 AMPS due to the plug

Please see below for Ratings, Operating Angle, or Cord Type Options

  • Ratings:
    • 25 AMP @ 120/240 VAC
    • 1 H.P. @ 120 VAC
    • 2 H.P. @ 240 VAC
    • 96 LRA
  • Operating Angle: Wide Angle
    • Contacts close @ 45° above horizontal
    • Contacts open @ 45° below horizontal
  • Operation Options:
    • Normally Open (Pump Down)
    • Normally Closed (Pump Up)
  • Cord Options:
    • 12 AWG Black SJOOW
Standard Float Skived Cord

Click to Enlarge

Available in the Avocado Shaped float package.

Avocado Series Standard Float Skived Cord

Click to Enlarge


SpecSheets PDF File