Home Store Products E/One® 2000 Series Retrofit - EOR-WTB-F (42 GPM Max & 133 Foot Head Max)

MDI offers Free Shipping on online orders over $300
(Some Restrictions May Apply - Store Policies)

E/One® 2000 Series Retrofit - EOR-WTB-F (42 GPM Max & 133 Foot Head Max)

SKU: EOR-WTB-F

Price: $2,199.99

The vortex impeller design of the grinder pump provides non-overloading performance and prevents clogging. The CPGH2023DS easily handle residential, light commercial or industrial sanitary waste, reducing it to fine slurry. The pump is designed for use in pressure sewer applications or any piping network. The recessed vortex impeller design of the CPGH2023DS grinder pump provides trouble free, non-overloading operation over the entire performance curve. The CPGH2023DS pump produces capacities to 42 GPM with heads to 133’ .

No Modifications to Existing System Operates with same Control Panel Superior Pump Performance, Reliable Operation
Turnkey Replacement Package
Fully Assembled
Simple Fast Installation
- For the 2000 Series
- Lower into Place
- Latch Arm over Pipe
- Mating Plug Connection
- 1 Year Warranty
The MDI advantages
- Fits into Existing 2000 Series System
  - No Changes
- Eliminates Existing Problems
- Better Pump Performance
  - More Flow
- Reduces Service (Maintenance Issues)
- Saves up to 20% on energy costs

E/One® brand name or trademark are the property of Environment One Corporation and are referred to for descriptive purposes only

Manufacturer: MDI Sewage Products

Weight: 125 lb

Delivery: Ships in 4-10 Business Days

Quantity

Click to Enlarge

Grinder Pump Features
Performances
- Heads Up to 133’ TDH
- Flows Up to 42 GPM
Strong 2 HP Motor
- 60 Hz Single-Phase
- 15 AMPS @ 230 VAC
Max Temp 150°F (Intermittent)
Grinder Pump Benefits
1. The grinder pump can easily handle waste from
  - Residential/Commercial Developments
  - Wastewater Transfer
  - Hospitals, Motels, Apartments
  - Schools, Universities
  - Churches
  - Campgrounds
  - Office Complexes
2. Sealed Entrance-Replaceable Power Cord
  - Easy to replace, prevents water from entering the motor housing through a cut power cord
  - Warranty is not voided if plug is cut off
3. External Start Kit
  - External Start/Run capacitor design for capacitors in the control panel
4. Grinder Pump Design
  - The centrifugal submersible grinder pump is capable of reducing all material found in normal residential and light industrial sewage containing small quantities of plastic, disposable diapers, sanitary napkins, rubber, food particles and other non-abrasive solids into a finely ground slurry
  - Heavy duty ASTMA48, Class 30 cast iron components
5. Strong Motor
  - Non-overloading high torque for powerful and reliable pump operation
  - The rotor and stator assembly is of the standard frame design
  - The motor windings shall be of Class B insulation and operate in a sealed environment containing clean dielectric oil, making it capable of operating in a totally, partially or non-submerged condition for extended periods of time without damage due to the heat being generated
6. 2-Bearing Support
  - Pump shall utilize a 2-Bearing design operating in an oil bath atmosphere, consisting of an upper single row, an intermediate single row, ball bearing for thrust loads and a lower bronze sleeve bearing for radial loads to prevent shaft deflection
  - Long 50,000-hour B-10 bearing life
7. Tandem Double Mechanical Seal Protection
  - Each shaft seal prevents leakage between the pump and motor
  - The upper seal is constructed of a carbon rotating face and ceramic stationary face, 300 series stainless steel hardware, and all elastomer parts to be Buna-N
  - The lower seal is silicon carbide rotating face and stationary face, 300 series stainless steel hardware, and all elastomer parts to be Viton
8. Non-Overloading Hydraulic Design
  - The recessed centrifugal impeller allows 100% performance curve operation from shut-off to maximum flow without damage to the pump or system
  - The recessed vortex impeller is out of the passageway of fluid flow, eliminating concerns of blockage or wear
  - The impeller shall be capable of being trimmed to meet specific performance characteristics
9. Proven Grinder Assembly
  - The shredding ring and radial cutter shall be constructed of 440C stainless steel hardened to a minimum Rockwell C55 and shall be finish for a fine cutting edge
  - The grinding mechanism shall be constructed to eliminate clogging and jamming under starting and all normal conditions and capable of passing stringy type solids through the pump without roping or winding the material
10. Accessories Included
  - Stainless steel lifting handle and anti-vibration rubber mounting feet are included with the grinder pump

MDI Inc. Our Company!

See all MDI Sewage Products
Mercury Displacement Industries Incorporated, better known in the industry we serve as MDI, was incorporated in Michigan in 1975. The primary product line is switch gear components including mercury type contactors, tilt switches and liquid level float controls.
Contactors are rated from 30 to 100 Amperes and are commonly used in various heating, lighting, and many other industrial applications including high voltage ultraviolet type loads. The contacts are encased in hermetically sealed stainless steel tubes to provide reliable switching for millions of operations. All basic units are UL, CSA, and CE approved.
The liquid level control floats are manufactured with mechanical or mercury switches. The float material is High Impact Polystyrene for normal alarm, sump pump or water applications, For sewage, 1 or 2 H.P. or high temperature, 86°C (186°F) requirements Acrylonitrile Butadiene Styrene, (ABS) float material is provided.
MDI has 40 to 50 employees and markets products through distributors, representatives or direct to OEM accounts throughout the world.

MDI Quality Policy
It is the policy of MDI to manufacture and market products of excellent quality, durability and reliability. This policy emphasizes the importance of product reputation and customer satisfaction in the success of our business. The MDI Team is committed without exception to the continuous improvement in quality and cost, and to manufacturing productivity and efficiency.

Since 1975
MDI Quality - Durability - Reliability