|
 Indoor Water Alarm Outdoor Tank Alarm Wireless Tank Alarm
|
Price quote form Installation Instructions
Go Back
|
SP-3000 Buy Now!
BBLA Alarm with Mechanical Float Switch MDI P/N: XF2OY1500
SP-3100 Buy Now!
BBLA Alarm with Mercury Float Switch MDI P/N: AS2OY1500
|
The BBLA alarm system is designed to monitor liquid levels in sump basins, holding tanks, lift stations tanks and many other non-potable water and wastewater applications.
The BBLA is design to sound an audible horn and illuminate a red light to notify of an alarm situation. There is a green line voltage power indicator light to show that the unit is functioning, as well as a silence switch to turn horn off while fixing the alarm (the red alarm light will remain on until the alarm conditions are remedied).
|
| Indoor High/Low Water Alarm w/ Battery Backup |
|
Specifications
Voltage:
Primary: 120 VAC, 60 Hz
Secondary: 12 VDC 60 Hz
Enclosure
NEMA 1 Thermoplastic enclosure with external mounting feet
6" X 3.75" X 2.50"
Alarm horn
85 Decibels at 10 feet
Power Cord
6 feet 120 VAC (NEMA 5-15P)
Battery Backup:
9V Battery
Auxiliary contacts:
120 VAC, 5 AMP MAX. 60 Hz
Features:
Red "Alarm On" LED, Green "Power On" LED
Alarm test and horn silence button with auto reset
Low voltage screw terminals
Class 2 Output, 12 VDC, connect ONLY the float switch -or- alarm device leads to the low voltage terminals.
DO NOT APPLY ELECTRICAL POWER
|
Float Switch Options
- SP-3000 - Comes with a mechanical float switch with the following:
- Cable: 15 foot length, 18 Ga. 2 conductor, SJOW chlorinated polyethylene jacket
- Float: 2" Dia X 3.40" long ABS outer shell
- Switch: 15 Deg operating angle, hermetically sealed mechanical ball switch
-or-
- SP-3100 - Comes with a mercury float switch with the following:
- Cable: 15 foot length, 18 Ga. 2 conductor, SJOW chlorinated polyethylene jacket
- Float: 2" Dia X 3" long ABS outer shell
- Switch: 5 Deg angle, hermetically sealed steel mercury switch
|
- Features
- Red "Alarm On" LED, Green "Power On" LED
- Alarm test and horn silence button with auto reset
- NEMA 1 Thermoplastic enclosure with external mounting feet , for indoor usage.
- Complete alarm includes a (Small Mercury or Mechanical) float switch with mounting strap and 15 foot cord.
- Alarm operates on 12 Volts, reducing the possibility of accidental electric shock.
- Auxiliary contacts with common, normally open and normally closed terminals are available behind a panel, on the lower right side, held in place by two #1 Phillips head screws. The barrier terminal screws are Phillips/Standard slot combo head type.
|
|
