The BBLA alarm system is designed to monitor liquid levels in sump basins, holding tanks, lift stations tanks and many other non-potable water and wastewater applications.
The BBLA is design to sound an audible horn and illuminate a red light to notify of an alarm situation. There is a green line voltage power indicator light to show that the unit is functioning, as well as a silence switch to turn horn off while fixing the alarm (the red alarm light will remain on until the alarm conditions are remedied).
Enclosure
NEMA 1 Thermoplastic enclosure with external mounting feet
6" X 3.75" X 2.50"
Alarm horn
85 Decibels at 10 feet
Power Cord
6 feet 120 VAC (NEMA 5-15P)
Battery Backup:
9V Battery
Auxiliary contacts:
120 VAC, 5 AMP MAX. 60 Hz
Features:
Red "Alarm On" LED, Green "Power On" LED
Alarm test and horn silence button with auto reset
Low voltage screw terminals
Class 2 Output, 12 VDC, connect ONLY the float switch -or- alarm device leads to the low voltage terminals. DO NOT APPLY ELECTRICAL POWER
Float Switch Options
SP-3000 - Comes with a mechanical float switch with the following:
Alarm test and horn silence button with auto reset
NEMA 1 Thermoplastic enclosure with external mounting feet , for indoor usage.
Complete alarm includes a (Small Mercury or Mechanical) float switch with mounting strap and 15 foot cord.
Alarm operates on 12 Volts, reducing the possibility of accidental electric shock.
Auxiliary contacts with common, normally open and normally closed terminals are available behind a panel, on the lower right side, held in place by two #1 Phillips head screws. The barrier terminal screws are Phillips/Standard slot combo head type.
P. O. Box 710 25028 U.S. 12 East Edwardsburg, Michigan 49112 PH. (269) 663-8574 FX. (269) 663-2924 Toll Free US and Canada (800) 634-4077
