Mercury Displacement Industries -> 2 HP Dual Seal Internal External Start Components Sewage Grinder Pumps

	2 HP Dual Seal Grinder Pump Start Kit in Control Box
A S S E M B L E D I N U. S. A. !
	The MDI grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to fine slurry. The G2-21SE (G2-21HE High Head) pump is designed for use in pressure sewer applications or any piping network. The recessed vortex impeller design of the G2-21SE (G2-21HE) grinder pump provides trouble free, non-overloading operation over the entire performance curve. The G2-21SE pump produces capacities to 43 gpm with heads to 106 feet (G2-21HE produces 20 gpm to 130 gpm). The G2-21SE (G2-21HE) grinder pump retrofits into many existing competitor pump installations. The G2-21SE (G2-21HE) pump operates with the same control panel and installation piping / rail system. Some of the other G2-21SE (G2-21HE) series pump features: 2 year warranty 30' SOOW 12 AWG cord Interchangeable into competitor installations Strong, 2 HP, 200/230 volt motor 14/12.8 AMPS Single Phase @ 60 Hz Dual silicon carbide shaft seals Class H motor, internal overload protection Internal moisture detection Potted cord cap assembly 3 Bearings shaft support Pressed in motor 27.5 x 8.25 x 10.75 with 1.25" NPT Removable Discharge Flange

G2-21SE - Features and Benefits

Triple Sealed Cable Entrance
Stainless steel strain relief cord grip with compression grommet protects outer cord jacket. Epoxy filled inner cord cap with individually soldered wires provide anti-wicking moisture protection to the motor even if power cable is cut or damaged.
Modular Pump Design
Commonality of parts across the pump product line minimizes the amount of parts required for servicing. Heavy duty ASTM A48, Class 30 cast iron components.
Strong Motor
High torque for powerful (200/230v) and reliable pump operation. Pressed stator securely holds motor and efficiently transfers heat. Class F insulation with overload protection in oil filled chamber for cool operation and long motor life.
3-Bearing Support
Motor / Pump shaft securely held with upper and lower ball bearing plus addition sleeve bearing in lower seal chamber. Long 50,000 hour B-10 bearing life.
Double Mechanical Seal Protection
Dual silicon carbide mechanical shaft seals provide twice the moisture protection for the motor. Dual seals are housed in a secondary oil filled seal chamber. Tougher silicon carbide seals better handles sand, grit and abrasive materials.
Moisture Detection
Seal leak probe signals alarm in control panel for scheduled maintenance.
Non-Overloading Hydraulic Design
The recessed centrifugal impeller allows 100% performance curve operation from shut-off to maximum flow without damage to the pump or system. The recessed vortex impeller is out of the passageway of fluid flow, eliminating concerns of blockage or wear.
Proven Grinder Assembly
Hardened (Rockwell 56-60) stainless steel grinder assembly has 30+ years proven field experience. The reversible grinder ring and grinder impeller effectively reduces solids into a fine slurry, easily passable in a piping system without concerns of clogging. Highly efficient 16,600 (G2-21HE 7,400) cuts per second.
Easy Piping Connection
Removable 1-1/4" NPT connection flange for simple and easy connection to discharge piping.
Accessories Included
Stainless steel lifting handle and anti-vibration rubber mounting feet are included with the pump.

Assembled
in U.S.A!

Pump Data
Discharge: 1-1/4" NPT Vertical
Grinder Ring: 18 Slots
Impeller Dia.: 5.5"
Impeller Vanes: 12
Impeller Type: Recessed Vortex

Motor Data
Start Capacitor: 216-250 mfd, 250 volt
Run Capacitor: 20 mfd, 370 volt
Rated Power: 200/230 volt, 1-Phase
Rated Current: 14/12.8 amps
Starting Current: 28 amps
Pole / Rate Speed: 2 Pole / 3450 RPM
Insulation Class: F