Liquid Level Control Floats
Grinder Pumps & Retrofits
Mercury Contactors
Solid State Relays
Tilt and Tip-over Switches
MDI
 
Spec Sheets & Outlines
MDI ETO Hybrid Timer
MDI
Store Categories
MDI
What's New?
GT3OT2000 - High Temp - 20' Cord - Wide Angle - Normally Open - Skived
GT3OT2000 - High Temp - 20' Cord - Wide Angle - Normally Open - Skived
$72.00
MDI
 


Buy Now Click HERE to order now!!!

ETO
CMOS digital circuitry
Time delays to 3 minutes
Adjustable time delay
No first cycle effect
SPST 20 Ampere Output rating (limited by terminals, relay rated at 35 or 60 Amps)
NEMA 4 enclosure
External terminal strips for all connections
Fully Solid State timing
2 wire time delay on operate
Screw driver adjustable with lock
  1. TIME DELAY
    Type: Digital CMOS circuitry
    Ranges: .25 to 7 Sec.
    5 to 120 Sec.
    120 to 360 Sec.
    Repeat accuracy: ± .5% ± 10m Sec.
    Reset time: 100 Milliseconds
    Time delay voltage variation: ± 30m Sec.
  2. INPUT
    Operation Voltage: 48, 125, 250 VDC
    Tolerance: -15%, +20% nominal
  3. OUTPUT
    Tube: Mercury Displacement type relay
    Form: Single Pole Single Throw, normally open or Normally closed
    Ratings: 20 Amperes at 250 VDC or 600 VAC G.P.
    Life: 10,000,000 operations full load
  4. PROTECTION
    Transient: 2.5 KV surge per ANSI C37 -.90. Reverse voltage protection
    Timing circuit inhibited below 50% of nominal voltage
    Dielectric Breakdown: 1500 VDC
  5. MECHANICAL
    Enclosed in 4" x 6" NEMA 4b Box
    Mounting: 4 External .31 DIA. holes on 7.5 x 2 pattern
    Must be mounted within 10° of vertical
    Termination: Barrier strips, #6 screws, (20 Amp rated) on exterior of enclosure
ETO Hybrid Timer
Click to enlarge


Buy Now Click HERE to order now!!!
MDI